CS448 Bricked After Firmware Update Attempt

CS448 Bricked After Firmware Update Attempt, a forum discussion on Cleverscope Mixed Signal USB Oscilloscopes. Join us for more discussions on CS448 Bricked After Firmware Update Attempt on our Other Issues forum.

Back to Forum Index : Back to Other Issues

JohJur

20th March
Posts: 4

Hi everyone,
we have a problem with our CS448 unit that seems to be bricked after attempting a firmware update. The update process did not complete successfully, and since then the device no longer starts up or appears in Cleverscope4. We’ve tried power?cycling and reconnecting it, but the scope does not show any signs of normal activity anymore.
Cleverscope4 also no longer detects the unit, so we cannot retry the firmware update or recover it through the software.
Any advice on how to revive the device would be greatly appreciated.
Thanks!

bartschroder

22nd March
Posts: 506

Hello Johannes,
Please send us an email, and we will send you an instruction on how to unbrick it. Email us at support@cleverscope.com.

To restore the scope you will need to reflash it. This is done with an Altera USB Blaster. If you don’t have one the fastest way is to buy one from Digikey:
https://www.digikey.com/en/products/detail/terasic-inc/P0302/2003484
They are USD69.

regards Bart

JohJur

23rd March
Posts: 4

Hi Bart,

I have sent an E-Mail

Br.

Back to Forum Index : Back to Other Issues

You must be logged in to post a reply