Products

Frequency Response Analysis capability is now available when using all our capture products. You will however get best performance when using the isolated CS701 signal generator. 

Cleverscope products all come with a Money Back Guarantee, and have a three year Warranty from date of manufacture. 

Oscilloscopes come complete and ready to use with Power Supply, Test Probes, Interface Cables and application CD included. 

First choose an Oscilloscope. Then upgrade your choice if necessary by adding factory options such as increased memory size, increased bit resolution,  signal generator, ethernet interface or external sample clock interface. Some oscilloscopes come preconfigured with all the necessary upgrades. The version with highest bit resolution, memory, isolated 0-65MHz sig gen is the XSi.  USB scopes come first, and then Ethernet scopes (which have an 'E' in the name).  

Click on the  right hand side down arrow to expand the section. 

CS328A-XS

Fully configured USB 2.0 oscilloscope - 14 bit 100 MSa/s, 2 analog channels, 8 digital inputs, External Trigger, 8M samples storage for each of the 2 analog and 8 digital channels, CS700 Signal Generator (0-10MHz, Sine, Square, Triangle). Complete with the CS300 application software, 2 x CS1001 and CS1004/5 probe sets. The front panel ground is continuous via the USB ground to the PC.

read more

CS328A-XS
PRICE $USD 2192.00

CS328A-XSi

Fully configured USB 2.0 oscilloscope - 14 bit 100 MSa/s, 2 analog channels, 8 digital inputs, External Trigger, 8M samples storage for each of the 2 analog and 8 digital channels, CS701 Isolated Signal Generator (0-65MHzMHz, Sine Wave ONLY). This is our best USB connected scope for high performance FRA. Complete with the CS300 application software, 2 x CS1001 and CS1004/5 probe sets. The front panel ground is continuous via the USB ground to the PC.

read more

CS328A-XSi
PRICE $USD 2292.00

CS328A-XSE

Fully configured ethernet oscilloscope - 14 bit 100 MSa/s, 2 analog channels, 8 digital inputs, External Trigger, 8M samples storage for each of the 2 analog and 8 digital channels, CS700 Signal Generator (0-10MHz, Sine, Square, Triangle). Complete with the CS300 application software, 2 x CS1001 and CS1004/5 probe sets. The ethernet interface is fully isolated from the PC.

read more

CS328A-XSE
PRICE $USD 2341.00

CS328A-XSEi

Fully configured ethernet oscilloscope - 14 bit 100 MSa/s, 2 analog channels, 8 digital inputs, External Trigger, 8M samples storage for each of the 2 analog and 8 digital channels, CS701 isolated Signal Generator (0-65MHz, Sine Wave ONLY). This is our best isolated scope, and you can use it for high performance FRA. Complete with the CS300 application software, 2 x CS1001 and CS1004/5 probe sets. The ethernet interface is fully isolated from the PC.

read more

CS328A-XSEi
PRICE $USD 2441.00

CS328A-FRA

USB 2.0 oscilloscope - 10 bit 100 MSa/s, 2 analog channels, 8 digital inputs, External Trigger, 4M samples storage for each of the 2 analog and 8 digital channels. The CS701 Isolated Signal Generator (0-65 MHz isolated sine) is factory fitted and included in the price. You don't need an isolation transformer to do FRA with it. Complete with the CS300 application software, 2 x CS1001 and CS1004/5 probe sets. The front panel ground is continuous via the USB ground to the PC.

read more

CS328A-FRA
PRICE $USD 1758.00

CS328A-FRA

USB 2.0 oscilloscope - 10 bit 100 MSa/s, 2 analog channels, 8 digital inputs, External Trigger, 4M samples storage for each of the 2 analog and 8 digital channels. The CS701 Isolated Signal Generator (0-65 MHz isolated sine) is factory fitted and included in the price. You can use the CS328A-FRA for Power Supply FRA without needing an isolation injection transformer. Complete with the CS300 application software, 2 x CS1001 and CS1004/5 probe sets. The front panel ground is continuous via the USB ground to the PC.

read more

CS328A-FRA
PRICE $USD 1758.00

CS328A

USB 2.0 oscilloscope, 10 bit, 100 MSa/s, 2 analog channels, 8 digital inputs, External Trigger, 4M samples storage for each of the 2 analog and 8 digital channels, comes with the CS300 application software, 2 x CS1001 and CS1004/5 probe sets. The front panel ground is continuous via the USB ground to the PC.

read more

CS328A
PRICE $USD 1359.00

CS328AE

ethernet oscilloscope, 10 bit, 100 MSa/s, 2 analog channels, 8 digital inputs, External Trigger, 4M samples storage for each of the 2 analog and 8 digital channels, comes with the CS300 application software, 2 x CS1001 and CS1004/5 probe sets. The ethernet interface is fully isolated from the PC.

read more

CS328AE
PRICE $USD 1508.00

CS320A-FRA

USB 2.0 oscilloscope, 10 bit, 100 MSa/s, 2 analog channels, External Trigger, 4M samples storage for each of the two analog and external trigger channels. The CS701 Isolated Signal Generator (0-65 MHz isolated sine) is factory fitted and included in the price. You don't need an isolation transformer to do FRA with it. Comes with CS300 application software and 2 x CS1001 probe set. The front panel ground is continuous via the USB ground to the PC.

read more

CS320A-FRA
PRICE $USD 1598.00

CS320A

USB 2.0 oscilloscope, 10 bit, 100 MSa/s, 2 analog channels, External Trigger, 4M samples storage for each of the two analog and external trigger channels, comes with CS300 application software and 2 x CS1001 probe set. The front panel ground is continuous via the USB ground to the PC.

read more

CS320A
PRICE $USD 1199.00

CS320AE

ethernet oscilloscope, 10 bit, 100 MSa/s, 2 analog channels, External Trigger, 4M samples storage for each of the two analog and external trigger channels, comes with CS300 application software and 2 x CS1001 probe set. The Ethernet interface is fully isolated from the PC.

read more

CS320AE
PRICE $USD 1348.00

CS700A

Signal Generator (0-10MHz, Sine, Square, Triangle)

read more

CS700A
PRICE $USD 299.00

CS701

Isolated Signal Generator (0-65MHz, Sine Wave Only) for serial numbers above 4000. The CS701 is rated at 300V RMS isolation (class III), and offers output levels from 1 mVp-p to 7 V p-p. You can use the CS701 for Power Supply FRA without needing an isolation injection transformer.

read more

CS701
PRICE $USD 399.00

CS712U

100 MHz 12 bit dual channel sampler replaces the 10 bit sampler. The sampler offers higher dynamic range (72 dB) at all frequencies.

CS712U
PRICE $USD 179.00

CS714U

100 MHz 14 bit dual channel sampler replaces the 10 bit sampler. The sampler offers higher dynamic range (84 dB) at all frequencies.

CS714U
PRICE $USD 319.00

CS741U

The CS741U is an Ethernet interface upgrade, which operates at 100 Mbit/sec, or about 6 Mbyte/sec sustained throughput. In normal use, there is no discernible difference in performance between the CS740 and CS741. However the Ethernet is transformer isolated to 1500 V peak, and so there is no galvanic connection to the PC. In addition because it is Ethernet, you can operate the Cleverscope on a network anywhere (even on the other side of the earth!). The CS741 replaces the CS740 USB module. It supports 10/100 Mbit/sec auto switch, automatic TX/RX selection (MDI), no cross over cable required.

CS741U
PRICE $USD 149.00

CS800

8 MSample Memory. This is only available for factory order with a new acquisition unit.

PRICE $USD 215.00

CS810

External sampler clock interface, 1 - 105 MHz, 0.5 - 3V p-p sine or square, 50 ohm terminated, SMA connection. (Cleverscope can supply external 100MHz clock modules for synching 2 scopes to one clock - please ask).

CS810
PRICE $USD 239.00

CS700A

Signal Generator (0-10MHz, Sine, Square, Triangle) for serial numbers above 4000

read more

CS700A
PRICE $USD 299.00

CS701

Isolated Signal Generator (0-65MHz, sine wave only) for serial numbers above 4000. The CS701 is rated at 300V RMS isolation (class III), and offers output levels from 1 mVp-p to 7 V p-p. You can use the CS701 for Power Supply FRA without needing an isolation injection transformer.

read more

CS701
PRICE $USD 399.00

CS740

The CS740 is a USB interface which operates USB 2.0, and offers sustained transfer rates of about 20 Mbyte/sec. The USB standard requires a ground connection, and so the CS328A front panel ground is continuous all the way through to the PC. If the user attaches a ground clip to a life terminal, then the PC might become live. For this reason our power supply also provides a low impedance ground connection, so the ground current goes to the power system, and hopefully blows a ground fault current detector, or a fuse. If you are doing only low voltage work, this is not a problem. If you are doing high voltage work, we recommend the CS741.

CS740
PRICE $USD 72.00

CS741

The CS741 is an Ethernet interface, which operates at 100 Mbit/sec, or about 6 Mbyte/sec sustained throughput. In normal use, there is no discernible difference in performance between the CS740 and CS741. However the Ethernet is transformer isolated to 1500 V peak, and so there is no galvanic connection to the PC. In addition because it is Ethernet, you can operate the Cleverscope on a network anywhere (even on the other side of the earth!). The CS741 comes boxed and plugs in in place of the USB Module. It comes with a replacement rear panel. 10/100 Mbit/sec auto switch, automatic TX/RX selection (MDI), no cross over cable required. Please email us your serial number when ordering so that we can make you the right back panel.

CS741
PRICE $USD 224.00

CS1070

The CS1070 Power Amplifier is used to amplify the output of the CS700A or CS701 signal generators. The 52 MHz bandwidth amplifier can swing 36Vpp with an output current up to 1A continuous. The CS1070 includes an internal inverting power supply to provide the negative rail, simplifying power supply requirements. The gain is fixed at x10 (20dB). The output voltage range is ±5V to ±18V and asymmetrical to +31, -5V for PSRR measurements right up to 30V as the input supply increases past 20V.

read more

CS1070
PRICE $USD 968.00

CS1100

Test Fixtures - three boards, one for low impedance (1mOhm - 1kOhm), another for high impedance (1 ohm - 25kOhm), and the third for transformer testing (B-H, X primary, X leakage, Cww, N, and Xmutual)

read more

CS1100
PRICE $USD 375.00

CS1020

4 Channel link cable. Allows two scopes to be linked together to give 4 analog and 16 digital channels. Requires the four channel software to be installed.

read more

CS1020
PRICE $USD 39.00

CS1040

Fibre isolated USB 1.1 interface cable. Minimum 2.5kV Isolation.

CS1040
PRICE $USD 269.00

CS1041

USB-to-USB Isolator protects your PC or Laptop while connecting USB peripherals wired to high voltages. This small, industrial- grade isolator is very easy for use and provides a high-voltage barrier for protection against surges, noise and ground loop errors. It is suitable for use in sensitive applications such as automotive measurements.

read more

CS1041
PRICE $USD 149.00

CS1001

Analog Probe (1x / 10x 250MHz)

read more

CS1001
PRICE $USD 49.00

CS1002

Analog Probe 100x 350MHz

read more

CS1002
PRICE $USD 54.00

CS1003

Analog Probe 1000x 50MHz

read more

CS1003
PRICE $USD 299.00

CS1004 + CS1005 Digital Probe Pods

Digital Probe pods (8 bit, 100 MHz) including probe clips

read more

CS1004 + CS1005 Digital Probe Pods
PRICE $USD 164.00

CS1010

A 50 ohm 5 nanosec delay line to link the A and B channels. Use the interleave function in maths to achieve a 200 MSample/sec single channel oscilloscope.

read more

CS1010
PRICE $USD 99.00

CS1030

Differential Probe. 25 MHz bandwidth, 1300V maximum operating voltage, three ranges x20, x50 and x200. These multipliers are default values in the Control Panel.

read more

CS1030
PRICE $USD 319.00

CS1031

Differential Probe. 50 MHz bandwidth, 6500V maximum operating voltage, four ranges x100, x200, x500 and x1000.

read more

CS1031
PRICE $USD 478.00

CS1060

AC/DC Current Probe
• Max. 70A DC/140Ap-p • Sensitivity: ≧2mA • Bandwidth: DC~1MHz
• Rise Time: 0.35μS • Over Range Function • 50mV/A, 500mV/A Range
• Battery or Power Adaptor (not supplied)

read more

CS1060
PRICE $USD 760.00

CS000

A dime

read more

PRICE $ 0.10

CS1050

Replacement or Additional 9V 230V/110V Power Supply. Requires a standard IEEE mains interface cable

CS1050
PRICE $USD 20.00

CS1051

Replacement or Additional 19V 230V/110V Power Supply for the CS1070. Requires a standard IEEE mains interface cable

PRICE $USD 60.00

CS300

Cleverscope Windows Application Software. Note we have added the Frequency Response Analyser (FRA) capability to our Cleverscope application and so now it is available with all variants of our products, including units you have already bought. For power supply and power plane measurements you do need the isolated CS701 signal generator.

read more

Free with Cleverscope but you are welcome to contribute!!

×

Your shopping cart is empty.