Does the digital threshold apply to all inputs?
Does the digital threshold apply to all inputs?, a forum discussion on Cleverscope Mixed Signal USB Oscilloscopes. Join us for more discussions on Does the digital threshold apply to all inputs? on our Questions forum.
You must be logged in to post a reply
Back to Forum Index : Back to Questions |
kevinaussie
28 Nov 2009
Posts:
Is it possible to adjust the digital threshold individually to each digital input?
I would like to monitor 6 seperate voltages between 2.5 and 16volts DC and have all the digital levels high unless the go under my levels by say 0.1 v.
Thanks for any advice.
Kevin
I would like to monitor 6 seperate voltages between 2.5 and 16volts DC and have all the digital levels high unless the go under my levels by say 0.1 v.
Thanks for any advice.
Kevin
rhcarter
30 Nov 2009
Posts: 113
Hi Kevin,
I am sorry but that is not possible with the digital inputs; they are all set by the one control. The only way to do it would be with two cleverscopes and use one digital and two analogue inputs on each unit. You can use the maths on the analogue inputs to give you the on/off result you are looking for - ltz(a-2.5), ltz(b-16). If you only have one cleverscope then you will need to make two passes.
Hope that helps.
Roger Carter
I am sorry but that is not possible with the digital inputs; they are all set by the one control. The only way to do it would be with two cleverscopes and use one digital and two analogue inputs on each unit. You can use the maths on the analogue inputs to give you the on/off result you are looking for - ltz(a-2.5), ltz(b-16). If you only have one cleverscope then you will need to make two passes.
Hope that helps.
Roger Carter
[editor:html]
Back to Forum Index : Back to Questions |