Need CS320
Need CS320, a forum discussion on Cleverscope Mixed Signal USB Oscilloscopes. Join us for more discussions on Need CS320 on our Questions forum.
You must be logged in to post a reply
![]() |
![]() |
Tedfordjst
13 Dec 2018
Posts: 4
Hi. I'm in the medical products industry and we are not allowed to upgrade a Test System without a ton of work. I need to acquire a CS320 with a serial number around *E****. The "E" is the year of manufacture. I don't know what year the CS320A came out but that won't work. I don't need the scope part of the tool, just the signal source and just channel A, no external trigger.
bartschroder
15 Dec 2018
Posts: 471
Hello,
Units with an *E**** were produced in 2005, and they are classic CS320, no 'A'. We have only archive versions left, which we do not want to sell. However we may be able to find an old board that requires repair. But it is the start of our Summer holiday, and we would not be able to look at this until February. Please use the Contact Us form to give us the actual serial number, and we can see what it had inside it.
Thanks.
Units with an *E**** were produced in 2005, and they are classic CS320, no 'A'. We have only archive versions left, which we do not want to sell. However we may be able to find an old board that requires repair. But it is the start of our Summer holiday, and we would not be able to look at this until February. Please use the Contact Us form to give us the actual serial number, and we can see what it had inside it.
Thanks.
Tedfordjst
24 Jan 2019
Posts: 4
Thanks for your response. The serial number is DH4642. This one is pretty dead. We also have 10 or so of these instruments that are picking up harmonics. I'd like to repair 2 others if possible. Here are 2 other marginal units: KE3184 and DE3046.
Tedfordjst
12 Feb 2019
Posts: 4
Hi Bart,
Its mid February and I'm hoping to get this repair going sometime this month. Any chance you guys can take a look at my CS320?
Cheers
Its mid February and I'm hoping to get this repair going sometime this month. Any chance you guys can take a look at my CS320?
Cheers
EddyRos
27 Feb 2019
Posts: 1
Did you manage to get your CS320 fixed, Tedfordjst? I'd appreciate any leads on where to get this done as I have the same model that needs fixing as well.
bartschroder
22 Jan 2020
Posts: 471
Sorry here are a year later. If you have an urgent need for personal attention, it is best to send us an email. You can use the contact form. We can repair units for you if needed. We can also send you the schematic so you can see what is going on.
Back to Forum Index : Back to Questions |
![]() |